diff options
author | Vincent Sanders <vince@kyllikki.org> | 2017-09-16 12:59:01 +0100 |
---|---|---|
committer | Vincent Sanders <vince@kyllikki.org> | 2017-09-16 12:59:01 +0100 |
commit | 3749e6a9e8f28a398dfa814b28e3928167f94873 (patch) | |
tree | c4023c9aaaae14084508efe87a3860476d9d814c | |
parent | 4b5012317ee8fb905b427cc1ca129e6b2451d66e (diff) | |
download | toolchains-3749e6a9e8f28a398dfa814b28e3928167f94873.tar.gz toolchains-3749e6a9e8f28a398dfa814b28e3928167f94873.tar.bz2 |
current debian stretch patch seems to copy amigaos.sc
-rw-r--r-- | ppc-amigaos/recipes/patches/binutils/missing-files.p | 531 |
1 files changed, 1 insertions, 530 deletions
diff --git a/ppc-amigaos/recipes/patches/binutils/missing-files.p b/ppc-amigaos/recipes/patches/binutils/missing-files.p index be93e0f..7911090 100644 --- a/ppc-amigaos/recipes/patches/binutils/missing-files.p +++ b/ppc-amigaos/recipes/patches/binutils/missing-files.p @@ -12489,533 +12489,4 @@ + ${LDEMUL_NEW_VERS_PATTERN-NULL} +}; +EOF ---- /dev/null 2015-09-06 08:42:34.091999986 +0100 -+++ ld/scripttempl/amigaos.sc 2016-01-03 01:46:50.663001071 +0000 -@@ -0,0 +1,527 @@ -+# -+# Unusual variables checked by this code: -+# NOP - four byte opcode for no-op (defaults to 0) -+# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not -+# empty. -+# SMALL_DATA_CTOR - .ctors contains small data. -+# SMALL_DATA_DTOR - .dtors contains small data. -+# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start -+# INITIAL_READONLY_SECTIONS - at start of text segment -+# OTHER_READONLY_SECTIONS - other than .text .init .rodata ... -+# (e.g., .PARISC.milli) -+# OTHER_TEXT_SECTIONS - these get put in .text when relocating -+# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... -+# (e.g., .PARISC.global) -+# OTHER_RELRO_SECTIONS - other than .data.rel.ro ... -+# (e.g. PPC32 .fixup, .got[12]) -+# OTHER_BSS_SECTIONS - other than .bss .sbss ... -+# ATTRS_SECTIONS - at the end -+# OTHER_SECTIONS - at the end -+# EXECUTABLE_SYMBOLS - symbols that must be defined for an -+# executable (e.g., _DYNAMIC_LINK) -+# TEXT_START_ADDR - the first byte of the text segment, after any -+# headers. -+# TEXT_BASE_ADDRESS - the first byte of the text segment. -+# TEXT_START_SYMBOLS - symbols that appear at the start of the -+# .text section. -+# DATA_START_SYMBOLS - symbols that appear at the start of the -+# .data section. -+# DATA_END_SYMBOLS - symbols that appear at the end of the -+# writeable data sections. -+# OTHER_GOT_SYMBOLS - symbols defined just before .got. -+# OTHER_GOT_SECTIONS - sections just after .got. -+# OTHER_SDATA_SECTIONS - sections just after .sdata. -+# OTHER_BSS_SYMBOLS - symbols that appear at the start of the -+# .bss section besides __bss_start. -+# DATA_PLT - .plt should be in data segment, not text segment. -+# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement. -+# BSS_PLT - .plt should be in bss segment -+# TEXT_DYNAMIC - .dynamic in text segment, not data segment. -+# EMBEDDED - whether this is for an embedded system. -+# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set -+# start address of shared library. -+# INPUT_FILES - INPUT command of files to always include -+# WRITABLE_RODATA - if set, the .rodata section should be writable -+# INIT_START, INIT_END - statements just before and just after -+# combination of .init sections. -+# FINI_START, FINI_END - statements just before and just after -+# combination of .fini sections. -+# STACK_ADDR - start of a .stack section. -+# OTHER_SYMBOLS - symbols to place right at the end of the script. -+# ETEXT_NAME - name of a symbol for the end of the text section, -+# normally etext. -+# SEPARATE_GOTPLT - if set, .got.plt should be separate output section, -+# so that .got can be in the RELRO area. It should be set to -+# the number of bytes in the beginning of .got.plt which can be -+# in the RELRO area as well. -+# USER_LABEL_PREFIX - prefix to add to user-visible symbols. -+# -+# When adding sections, do note that the names of some sections are used -+# when specifying the start address of the next. -+# -+ -+# Many sections come in three flavours. There is the 'real' section, -+# like ".data". Then there are the per-procedure or per-variable -+# sections, generated by -ffunction-sections and -fdata-sections in GCC, -+# and useful for --gc-sections, which for a variable "foo" might be -+# ".data.foo". Then there are the linkonce sections, for which the linker -+# eliminates duplicates, which are named like ".gnu.linkonce.d.foo". -+# The exact correspondences are: -+# -+# Section Linkonce section -+# .text .gnu.linkonce.t.foo -+# .rodata .gnu.linkonce.r.foo -+# .data .gnu.linkonce.d.foo -+# .bss .gnu.linkonce.b.foo -+# .sdata .gnu.linkonce.s.foo -+# .sbss .gnu.linkonce.sb.foo -+# .sdata2 .gnu.linkonce.s2.foo -+# .sbss2 .gnu.linkonce.sb2.foo -+# .debug_info .gnu.linkonce.wi.foo -+# .tdata .gnu.linkonce.td.foo -+# .tbss .gnu.linkonce.tb.foo -+# .lrodata .gnu.linkonce.lr.foo -+# .ldata .gnu.linkonce.l.foo -+# .lbss .gnu.linkonce.lb.foo -+# -+# Each of these can also have corresponding .rel.* and .rela.* sections. -+ -+test -z "$ENTRY" && ENTRY=_start -+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} -+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} -+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi -+test -z "${ELFSIZE}" && ELFSIZE=32 -+test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" -+test "$LD_FLAG" = "N" && DATA_ADDR=. -+test -z "${ETEXT_NAME}" && ETEXT_NAME=etext -+test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" -+test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" -+test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT -+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" -+DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE})" -+#DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" -+DATA_SEGMENT_RELRO_END="" -+DATA_SEGMENT_END="" -+if test -n "${COMMONPAGESIZE}"; then -+ DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" -+ DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" -+ DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);" -+fi -+if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then -+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }" -+fi -+if test -z "$PLT"; then -+ PLT=".plt ${RELOCATING-0} : { *(.plt) }" -+fi -+test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes -+if test -z "$GOT"; then -+ if test -z "$SEPARATE_GOTPLT"; then -+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }" -+ else -+ GOT=".got ${RELOCATING-0} : { *(.got) }" -+ GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }" -+ fi -+fi -+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" -+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" -+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }" -+DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }" -+if test -z "${NO_SMALL_DATA}"; then -+ SBSS=".sbss ${RELOCATING-0} : -+ { -+ ${RELOCATING+${SBSS_START_SYMBOLS}} -+ ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)} -+ *(.dynsbss) -+ *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) -+ *(.scommon) -+ ${RELOCATING+${SBSS_END_SYMBOLS}} -+ }" -+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" -+ SDATA="/* We want the small data sections together, so single-instruction offsets -+ can access them all, and initialized data all before uninitialized, so -+ we can shorten the on-disk segment size. */ -+ .sdata ${RELOCATING-0} : -+ { -+ ${RELOCATING+${SDATA_START_SYMBOLS}} -+ ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)} -+ *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) -+ }" -+ SDATA2=".sdata2 ${RELOCATING-0} : -+ { -+ ${RELOCATING+${SDATA2_START_SYMBOLS}} -+ *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) -+ }" -+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } -+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" -+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } -+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" -+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } -+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" -+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } -+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" -+else -+ NO_SMALL_DATA=" " -+fi -+if test -z "${DATA_GOT}"; then -+ if test -n "${NO_SMALL_DATA}"; then -+ DATA_GOT=" " -+ fi -+fi -+if test -z "${SDATA_GOT}"; then -+ if test -z "${NO_SMALL_DATA}"; then -+ SDATA_GOT=" " -+ fi -+fi -+test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " -+test "${LARGE_SECTIONS}" = "yes" && REL_LARGE=" -+ .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) } -+ .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) } -+ .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) } -+ .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) } -+ .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) } -+ .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }" -+test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS=" -+ ${OTHER_BSS_SECTIONS} -+ .lbss ${RELOCATING-0} : -+ { -+ *(.dynlbss) -+ *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*}) -+ *(LARGE_COMMON) -+ }" -+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS=" -+ .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : -+ { -+ *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*}) -+ } -+ .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : -+ { -+ *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*}) -+ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} -+ }" -+CTOR=".ctors ${CONSTRUCTING-0} : -+ { -+ ${CONSTRUCTING+${CTOR_START}} -+ /* gcc uses crtbegin.o to find the start of -+ the constructors, so we make sure it is -+ first. Because this is a wildcard, it -+ doesn't matter if the user does not -+ actually link against crtbegin.o; the -+ linker won't look for a file to match a -+ wildcard. The wildcard also means that it -+ doesn't matter which directory crtbegin.o -+ is in. */ -+ -+ KEEP (*crtbegin.o(.ctors)) -+ KEEP (*crtbegin?.o(.ctors)) -+ -+ /* We don't want to include the .ctor section from -+ the crtend.o file until after the sorted ctors. -+ The .ctor section from the crtend file contains the -+ end of ctors marker and it must be last */ -+ -+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) -+ KEEP (*(SORT(.ctors.*))) -+ KEEP (*(.ctors)) -+ ${CONSTRUCTING+${CTOR_END}} -+ }" -+DTOR=".dtors ${CONSTRUCTING-0} : -+ { -+ ${CONSTRUCTING+${DTOR_START}} -+ KEEP (*crtbegin.o(.dtors)) -+ KEEP (*crtbegin?.o(.dtors)) -+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) -+ KEEP (*(SORT(.dtors.*))) -+ KEEP (*(.dtors)) -+ ${CONSTRUCTING+${DTOR_END}} -+ }" -+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : -+ { -+ ${RELOCATING+_stack = .;} -+ *(.stack) -+ }" -+ -+# if this is for an embedded system, don't add SIZEOF_HEADERS. -+if [ -z "$EMBEDDED" ]; then -+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" -+else -+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" -+fi -+ -+cat <<EOF -+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", -+ "${LITTLE_OUTPUT_FORMAT}") -+OUTPUT_ARCH(${OUTPUT_ARCH}) -+ENTRY(${ENTRY}) -+ -+${RELOCATING+${LIB_SEARCH_DIRS}} -+${RELOCATING+${EXECUTABLE_SYMBOLS}} -+${RELOCATING+${INPUT_FILES}} -+${RELOCATING- /* For some reason, the Solaris linker makes bad executables -+ if gld -r is used and the intermediate file has sections starting -+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld -+ bug. But for now assigning the zero vmas works. */} -+ -+SECTIONS -+{ -+ /* Read-only sections, merged into text segment: */ -+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}} -+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} -+ ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} -+ ${INITIAL_READONLY_SECTIONS} -+ .note.gnu.build-id : { *(.note.gnu.build-id) } -+ ${TEXT_DYNAMIC+${DYNAMIC}} -+ .hash ${RELOCATING-0} : { *(.hash) } -+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) } -+ .dynsym ${RELOCATING-0} : { *(.dynsym) } -+ .dynstr ${RELOCATING-0} : { *(.dynstr) } -+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) } -+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } -+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } -+ -+EOF -+if [ "x$COMBRELOC" = x ]; then -+ COMBRELOCCAT=cat -+else -+ COMBRELOCCAT="cat > $COMBRELOC" -+fi -+eval $COMBRELOCCAT <<EOF -+ .rel.init ${RELOCATING-0} : { *(.rel.init) } -+ .rela.init ${RELOCATING-0} : { *(.rela.init) } -+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } -+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } -+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) } -+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) } -+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } -+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } -+ ${OTHER_READONLY_RELOC_SECTIONS} -+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) } -+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) } -+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } -+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } -+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } -+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } -+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } -+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } -+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } -+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } -+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } -+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } -+ .rel.got ${RELOCATING-0} : { *(.rel.got) } -+ .rela.got ${RELOCATING-0} : { *(.rela.got) } -+ ${OTHER_GOT_RELOC_SECTIONS} -+ ${REL_SDATA} -+ ${REL_SBSS} -+ ${REL_SDATA2} -+ ${REL_SBSS2} -+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } -+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } -+ ${REL_LARGE} -+EOF -+if [ -n "$COMBRELOC" ]; then -+cat <<EOF -+ .rel.dyn ${RELOCATING-0} : -+ { -+EOF -+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC -+cat <<EOF -+ } -+ .rela.dyn ${RELOCATING-0} : -+ { -+EOF -+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC -+cat <<EOF -+ } -+EOF -+fi -+cat <<EOF -+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) } -+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) } -+ ${OTHER_PLT_RELOC_SECTIONS} -+ -+ .init ${RELOCATING-0} : -+ { -+ ${RELOCATING+${INIT_START}} -+ KEEP (*(.init)) -+ ${RELOCATING+${INIT_END}} -+ } =${NOP-0} -+ -+ ${TINY_READONLY_SECTION} -+ .text ${RELOCATING-0} : -+ { -+ ${RELOCATING+${TEXT_START_SYMBOLS}} -+ *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) -+ KEEP (*(.text.*personality*)) -+ /* .gnu.warning sections are handled specially by elf32.em. */ -+ *(.gnu.warning) -+ ${RELOCATING+${OTHER_TEXT_SECTIONS}} -+ } =${NOP-0} -+ . = ALIGN(4096); -+ ${TEXT_PLT+${PLT}} -+ . = ALIGN(4096); -+ .fini ${RELOCATING-0} : -+ { -+ ${RELOCATING+${FINI_START}} -+ KEEP (*(.fini)) -+ ${RELOCATING+${FINI_END}} -+ } =${NOP-0} -+ ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);} -+ ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);} -+ ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);} -+ ${WRITABLE_RODATA-${RODATA}} -+ .rodata1 ${RELOCATING-0} : { *(.rodata1) } -+ ${CREATE_SHLIB-${SDATA2}} -+ ${CREATE_SHLIB-${SBSS2}} -+ ${OTHER_READONLY_SECTIONS} -+ .eh_frame_hdr : { *(.eh_frame_hdr) } -+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } -+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) } -+ -+ /* Adjust the address for the data segment. We want to adjust up to -+ the same address within the page on the next page up. */ -+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} -+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} -+ ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} -+ -+ /* Exception handling */ -+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } -+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } -+ -+ /* Thread Local Storage sections */ -+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } -+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } -+ -+ .preinit_array ${RELOCATING-0} : -+ { -+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}} -+ KEEP (*(.preinit_array)) -+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}} -+ } -+ .init_array ${RELOCATING-0} : -+ { -+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}} -+ KEEP (*(SORT(.init_array.*))) -+ KEEP (*(.init_array)) -+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}} -+ } -+ .fini_array ${RELOCATING-0} : -+ { -+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}} -+ KEEP (*(.fini_array)) -+ KEEP (*(SORT(.fini_array.*))) -+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}} -+ } -+ ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}} -+ ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}} -+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } -+ -+ ${RELOCATING+${DATARELRO}} -+ ${OTHER_RELRO_SECTIONS} -+ ${TEXT_DYNAMIC-${DYNAMIC}} -+ ${DATA_GOT+${RELRO_NOW+${GOT}}} -+ ${DATA_GOT+${RELRO_NOW+${GOTPLT}}} -+ ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}} -+ ${RELOCATING+${DATA_SEGMENT_RELRO_END}} -+ ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}} -+ ${DATA_GOT+${RELRO_NOW-${GOTPLT}}} -+ -+ ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} -+ -+ .data ${RELOCATING-0} : -+ { -+ ${RELOCATING+${DATA_START_SYMBOLS}} -+ *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) -+ ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))} -+ ${CONSTRUCTING+SORT(CONSTRUCTORS)} -+ } -+ .data1 ${RELOCATING-0} : { *(.data1) } -+ ${WRITABLE_RODATA+${RODATA}} -+ ${OTHER_READWRITE_SECTIONS} -+ ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}} -+ ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}} -+ ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} -+ ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}} -+ ${SDATA_GOT+${GOT}} -+ ${SDATA_GOT+${OTHER_GOT_SECTIONS}} -+ ${SDATA} -+ ${OTHER_SDATA_SECTIONS} -+ ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}} -+ ${RELOCATING+__bss_start = .;} -+ ${RELOCATING+${OTHER_BSS_SYMBOLS}} -+ ${SBSS} -+ ${BSS_PLT+${PLT}} -+ .bss ${RELOCATING-0} : -+ { -+ *(.dynbss) -+ *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) -+ *(COMMON) -+ /* Align here to ensure that the .bss section occupies space up to -+ _end. Align after .bss to ensure correct alignment even if the -+ .bss section disappears because there are no input sections. -+ FIXME: Why do we need it? When there is no .bss section, we don't -+ pad the .data section. */ -+ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} -+ } -+ ${OTHER_BSS_SECTIONS} -+ ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} -+ ${RELOCATING+. = ALIGN(${ALIGNMENT});} -+ ${LARGE_SECTIONS} -+ ${RELOCATING+. = ALIGN(${ALIGNMENT});} -+ ${RELOCATING+${OTHER_END_SYMBOLS}} -+ ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}} -+ ${RELOCATING+${DATA_SEGMENT_END}} -+ -+ /* Stabs debugging sections. */ -+ .stab 0 : { *(.stab) } -+ .stabstr 0 : { *(.stabstr) } -+ .stab.excl 0 : { *(.stab.excl) } -+ .stab.exclstr 0 : { *(.stab.exclstr) } -+ .stab.index 0 : { *(.stab.index) } -+ .stab.indexstr 0 : { *(.stab.indexstr) } -+ -+ .comment 0 : { *(.comment) } -+ -+ /* DWARF debug sections. -+ Symbols in the DWARF debugging sections are relative to the beginning -+ of the section so we begin them at 0. */ -+ -+ /* DWARF 1 */ -+ .debug 0 : { *(.debug) } -+ .line 0 : { *(.line) } -+ -+ /* GNU DWARF 1 extensions */ -+ .debug_srcinfo 0 : { *(.debug_srcinfo) } -+ .debug_sfnames 0 : { *(.debug_sfnames) } -+ -+ /* DWARF 1.1 and DWARF 2 */ -+ .debug_aranges 0 : { *(.debug_aranges) } -+ .debug_pubnames 0 : { *(.debug_pubnames) } -+ -+ /* DWARF 2 */ -+ .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) } -+ .debug_abbrev 0 : { *(.debug_abbrev) } -+ .debug_line 0 : { *(.debug_line) } -+ .debug_frame 0 : { *(.debug_frame) } -+ .debug_str 0 : { *(.debug_str) } -+ .debug_loc 0 : { *(.debug_loc) } -+ .debug_macinfo 0 : { *(.debug_macinfo) } -+ -+ /* SGI/MIPS DWARF 2 extensions */ -+ .debug_weaknames 0 : { *(.debug_weaknames) } -+ .debug_funcnames 0 : { *(.debug_funcnames) } -+ .debug_typenames 0 : { *(.debug_typenames) } -+ .debug_varnames 0 : { *(.debug_varnames) } -+ -+ /* DWARF 3 */ -+ .debug_pubtypes 0 : { *(.debug_pubtypes) } -+ .debug_ranges 0 : { *(.debug_ranges) } -+ -+ ${TINY_DATA_SECTION} -+ ${TINY_BSS_SECTION} -+ -+ ${STACK_ADDR+${STACK}} -+ ${ATTRS_SECTIONS} -+ ${OTHER_SECTIONS} -+ ${RELOCATING+${OTHER_SYMBOLS}} -+ ${RELOCATING+${DISCARDED}} -+} -+EOF + |